通达信指标成本布林线

1. 通达信怎么把布林线作为看盘主图

通达信软件中有两个布林线指标，一个布林线指标是主图一个是副图，如果你想把幅图的布林线指标在主图用需要自己编写一个主图公式才可以使用。

2. 求通达信里面股价突破布林线上轨的选股公式

BOLL:=MA(CLOSE,20);
UB:=BOLL+2*STD(CLOSE,20);
LB:=BOLL-2*STD(CLOSE,20);
C>=UB;

3. 请问通达信如何编写两条布林带的指标公式

编写倒是容易就是不太明白你的意思

4. 如何在通达信软件的主图上同时显示均线系统和布林线指标。

通达信里BOLL-M指标本身是主图叠加的，但有锁无法编辑，因此可以通过CTRL+F（公回式编辑器），找到这个BOLL指标（答在路径型指标公式中）进行编辑，考出指标公式，然后添加MA指标公式即可，注意别忘了“画线方法”一栏选择“主图叠加”

BOLL:MA(CLOSE,N);
UPPER:BOLL+2*STD(CLOSE,N);
LOWER:BOLL-2*STD(CLOSE,N);
MA5:MA(CLOSE,5);
MA10:MA(CLOSE,10);
MA30:MA(CLOSE,30);
MA60:MA(CLOSE,60);

设置N参数，最小2，最大1000，默认120

5. 通达信附图怎么添加多空布林线指标

添加步骤如下：

1、在副图空白处单击鼠标右键，在弹出菜单中点击“副图”指标---“选择副图指标”

6. 通达信的BOLL指标这么用

一般来说股价超上轨要下跌，超下轨要上涨，这样就可以测试股价波动是否正常。

7. 通达信如何设计boll指标条件选股

一、收盘价向上突破下限，为买入信号;二、收盘价向上突破上限，为卖出信号;三、参数: N 天数，在计算布林带时用，一般26天 P 一般为20，用于调整上限和下限的值

8. 通达信神奇公式怎么选股通达信神奇布林线股票指标公式如下：mid2：=m

{神奇布林线主图}
MID2 := MA(CLOSE,21),COLORWHITE;
UPPER2:=MID2 + 1.96*STD(CLOSE,21),COLORYELLOW;
LOWER2:=MID2 - 1.96*STD(CLOSE,21),COLORYELLOW;
UP2:=MID2 + 2.56*STD(CLOSE,21),COLORFF00FF;
LOOW2:=MID2 - 2.56*STD(CLOSE,21),COLORFF00FF;
{上升趋势}
STICKLINE(C>=MID2,MID2,UP2,2,0),COLOR330066;
{下降趋势}
STICKLINE(C<MID2,MID2,LOOW2,2,0),COLOR545454;
MID:MID2,COLORWHITE;
UPPER:UPPER2,COLORYELLOW;
UP:UP2,COLORFF00FF;
LOWER:LOWER2,COLORYELLOW;
LOOW:LOOW2,COLORFF00FF;
开口:=UP-LOOW;
相离:=C-MID;
DRAWTEXT(C>=MID AND REF(开口,1)=HHV(开口,20),UPPER,'减仓'),COLOR00FF00;
DRAWTEXT(C>=MID AND REF(相离,1)=LLV(相离,5),MID,'加仓');
股价多头:=C>MA(C,5) AND MA(C,5)>MA(C,10) AND MA(C,10)>MA(C,20);
DRAWTEXT(FILTER(股价多头,20),LOOW*0.95,'开始建仓'),COLORRED;
DRAWICON(FILTER(股价多头,20),LOWER,1),COLORRED;
DRAWTEXT(CROSS(MID,C),UP,'空仓观望'),COLORYELLOW;
DRAWICON(CROSS(MID,C),UPPER,2),COLORYELLOW;
{K线}
{STICKLINE((CLOSE > OPEN),CLOSE,OPEN,5.2,0),COLOR070084;}
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,4,1),COLOR0000A3;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,3.5,0),COLOR000033;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,3,0),COLOR000066;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,2.0,0),COLOR000099;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,1.5,0),COLOR0000CC;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,1.0,0),COLOR0000FF;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,0.5,0),COLORCC66FF;
STICKLINE((CLOSE > OPEN),OPEN,LOW,0.3,0),COLORRED;
STICKLINE((CLOSE > OPEN),CLOSE,HIGH,0.3,0),COLORRED;
{STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,5.2,0),COLOR070084;}
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,4,1),COLOR0000A3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,3.5,0),COLOR0000B7;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,3,0),COLOR0000CD;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,2.0,0),COLOR0000E9;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,1.5,0),COLOR0754E9;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,1.0,0),COLOR076EF3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,0.5,0),COLOR077BF3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),OPEN,LOW,0.3,0),COLOR0000CD;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,HIGH,0.3,0),COLOR0000CD;
{STICKLINE((OPEN > CLOSE),CLOSE,OPEN,5.2,0),COLORFF5B00;}
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,4,1),COLORFF6C00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,3.5,0),COLORFF7B00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,2,0),COLORFF9C00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,1.5,0),COLORFFBE00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,1,0),COLORFFCC00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,0.5,0),COLORFFFF00;
STICKLINE((OPEN > CLOSE),CLOSE,LOW,0.3,0),COLORFF9C00;
STICKLINE((OPEN > CLOSE),OPEN,HIGH,0.3,0),COLORFF9C00;
{STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,5.2,0),COLORFF5B00;}
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,4,1),COLORFF6C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,3.5,0),COLORFF7B00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,2,0),COLORFF9C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,1.5,0),COLORFFBE00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,1,0),COLORFFCC00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,0.5,0),COLORFFFF00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,LOW,0.3,0),COLORFF9C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),OPEN,HIGH,0.3,0),COLORFF9C00;
====================
{选股}
MID := MA(CLOSE,21);
相离:=C-MID;
加仓:=C>=MID AND REF(相离,1)=LLV(相离,5);
股价多头:=C>MA(C,5) AND MA(C,5)>MA(C,10) AND MA(C,10)>MA(C,20);
开始建仓:=FILTER(股价多头,20);
XG:加仓 OR 开始建仓;

9. 通达信交易软件布林带指标（BOLL）设置问题

看图设置,有问题可以HI我

10. 求高手，通达信选股公式 股价突破boll线中轨

根据需要，来分别做两个选股公式如自下：注意参数N自己参考通达信的布林指标的参数设置

{1、当天股价曾经或已经上穿布林线上轨，并且上轨相对于昨天是向上的，下轨相对于昨天是向下的 N（20）}

上轨1:=MA(CLOSE,N)+2*STD(CLOSE,N);
下轨1:=MA(CLOSE,N)-2*STD(CLOSE,N);
上破:CROSS(H,上轨1) AND 上轨1>REF(上轨1,1) AND 下轨1<REF(下轨1,1);

{2、当天股价曾经或已经下穿布林线下轨，并且下轨相对于昨天是向下的，上轨相对于昨天是向上的}
上轨2:=MA(CLOSE,N)+2*STD(CLOSE,N);
下轨2:=MA(CLOSE,N)-2*STD(CLOSE,N);
下破:CROSS(下轨2,L) AND 上轨2>REF(上轨2,1) AND 下轨2<REF(下轨2,1);