通达信ASI背离指标公式

A. 通达信cci全背离指标公式怎样用

一般背离是有两种，，，，顶背卖出，底背离买入 ，3385478641

B. 通达信背离指标

通达信背离指标 有很多的常用普通指标比如 MACD KJD RSI OBV 等等 指标只是参考 不能根据一个指标背离就马上买入或者卖出

C. 求助！！通达信RSI背离选股公式

底背离可以用很多种方法认定,例如用时间,也就是第一段时间的和第二段版时间中rsi指标最权低值在上升,价格同时期在下降,还有是两次死叉过程中产生的低点做对比,发现背离.
背离是一种形态分析的方法
想把背离编辑成选股公式,需要你先确认你是如何判断背离标准的.把判断的方法转换成具体的条件.
例如图中的rsi背离划线指标.是根据两次死叉时发生的最低点判断的,在金叉发生时,提示前面产生过背离.
图片中就的效果就是

黄色箭头是差值大于10 白色箭头是单纯比大小

参数n是最近几日除以除以2的结果,如果是最近6日参数就填3就行了

N:=3;
XG1:LLV(RSI.RSI1,N)>REF(LLV(RSI.RSI1,N),N-1)ANDLLV(L,N)<REF(LLV(L,N),N-1);
XG2:LLV(RSI.RSI1,N)-REF(LLV(RSI.RSI1,N),N-1)>10ANDLLV(L,N)<REF(LLV(L,N),N-1);

想用哪个就把另一个冒号后加个等号就可以了

这种背离判断过于简单,准确率没测过不知道

D. 求助：通达信背离王划线并选股公式

A1:=FORCAST(EMA(CLOSE,5),6);
A2:=FORCAST(EMA(CLOSE,8),6);
A3:=FORCAST(EMA(CLOSE,11),6);
A4:=FORCAST(EMA(CLOSE,14),6);
A5:=FORCAST(EMA(CLOSE,17),6);
B:=A1+A2+A3+A4-4*A5;
TOWERC:=EMA(B,2);
FORCAST(EMA(B,3),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,4),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,5),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,6),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,7),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,8),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,9),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,10),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,11),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,12),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,13),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,14),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,15),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,16),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,17),6),POINTDOT,COLORGREEN;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),8,0),COLORRED;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),8,0),COLORGREEN;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),5,0),COLORRED;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),3,0),COLORRED;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),0,0),COLORRED;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),8,0),COLORGREEN;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),5,0),COLORGREEN;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),2,0),COLORGREEN;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),0,0),COLORGREEN;
选股

A1:=FORCAST(EMA(CLOSE,5),6);
A2:=FORCAST(EMA(CLOSE,8),6);
A3:=FORCAST(EMA(CLOSE,11),6);
A4:=FORCAST(EMA(CLOSE,14),6);
A5:=FORCAST(EMA(CLOSE,17),6);
B:=A1+A2+A3+A4-4*A5;
TOWERC:=EMA(B,2);
XG:TOWERC>=REF(TOWERC,1) AND REF(TOWERC,1)<REF(TOWERC,2);

E. 通达信MACD底背离选股公式

股价创30日新低:l<=llv(l,30);
当日MACD（就是那个红绿柱子）值大于昨日:"macd.macd”>ref("macd.macd",1);
当日DIFF（白线） 没创新低:"macd.dif">=ref("macd.dif",1);

选股1:l<=LLV(l,30) AND "MACD.MACD">REF("MACD.MACD",1);
选股2:l<=LLV(l,30) AND "MACD.DIF">=REF("MACD.DIF",1);

选股3:l<=LLV(l,30) AND "MACD.MACD">REF("MACD.MACD",1) and
"MACD.DIF">=REF("MACD.DIF",1);

F. 求 通达信 MACD 顶背离 和 顶部二次背离 选股公式：

SQX:=(C-MA(CLOSE,13))*100; DIFF:EMA(MA(SQX,7),1),COLOR00FFFF; DEA:EMA(DIFF,7),COLORFF33FF; MACD:(DIFF-DEA)*2,COLORSTICK; 低位金叉:IF(CROSS(DIFF,DEA) AND DIFF<-0.1,0.3,0),COLORYELLOW,POINTDOT; STICKLINE(低位金叉,0,15,8,0),COLORYELLOW;DRAWICON(低位金叉,0.3,1); JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0)); 二次金叉:IF(CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1,0.2,0),COLORFF00FF,POINTDOT; STICKLINE(二次金叉,30,15,8,0),COLORFF00FF; A1:=BARSLAST(REF(CROSS(DIFF,DEA),1)); 底背离:IF(REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA),0.1,0),COLORRED,POINTDOT; STICKLINE(底背离,45,30,8,0),COLORRED;DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED; A2:=BARSLAST(REF(CROSS(DEA,DIFF),1)); 顶背离:REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF),COLORGREEN; DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN; A3:=CROSS(DIFF,DEA) AND DEA<0; 零下二次金叉:IF(FILTER(COUNT(A3,21)=2,10),0.05,0),COLORWHITE,POINTDOT; STICKLINE(零下二次金叉,45,60,8,0),COLORWHITE;

G. 请高手写一个通达信MACD背离的选股公式。

A:=CROSS(MACD.DIF,MACD.DEA);
TS:=REF(BARSLAST(A),1);
A1:=C<REF(C,TS+1);
A2:=MACD.DIF>REF(MACD.DIF,TS+1);
A AND A1 AND A2;

H. 哪位老师有通达信MACD柱体背离的指标公式分享一个，真心感谢

偷懒，前一位弄的公式，给更正一下，其他内容纹丝没内动。
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
DD:=C=HHV(C,180);
EE:=DEA< REF(DEA,1) AND REF(DEA< REF(DEA,1),1)=1;
CC:=C> REF(C,1) AND REF(C> REF(C,1),1)=1;
FF:=C=LLV(C,180);
GG:=DEA> REF(DEA,1) AND REF(DEA> REF(DEA,1),1)=1;
LL:=C< REF(C,1) AND REF(C< REF(C,1),1)=1;
底背容离:(FF AND GG AND DEA> LLV(DEA,180))*DEA;