平量柱指標公式_如何把黑馬王子量柱擒漲停指標公式導入通達信

⑴ 要量柱擒住漲停公式和成交量公式有平量，地量，凹量的公式的那種謝謝能編寫嗎

平量是與來前一根量自柱持平或基本持平的兩根或多根量柱持平。價升量平或價跌量平，是量柱中的「實戰量價形態」有著支撐壓力的用處,也是莊家攻擊量.
地量是相對於大盤處於高位的天量而言，通過統計歷史上股指處於高位、低位的成交量數據，可以發現，地量的標准有跡可循。衡量中級下跌行情是否見底的標準是：底部成交量要縮至頂部最高成交量的20%以內。如果成交量大於這個比例，說明股指仍有下跌空間；反之，則可望見底。

⑵ 如何把黑馬王子量柱擒漲停指標公式導入通達信

{量柱擒漲停（黑馬王子量柱理論）}

VOLUME:VOL,VOLSTICK;

|:COUNT(CLOSE>REF(CLOSE,1),2)=2 AND COUNT(VOL<REF(VOL,1),2)=2;

STICKLINE(|,0,V,1,0),COLORGREEN;

DRAWTEXT(|,VOL+3000,'降'),COLORGREEN;

T:=DYNAINFO(8)>0;

VO:VOL=LLV(VOL,100) AND T;

地量柱:T AND VO,COLORBLUE;

STICKLINE(地量柱,0,V,1,0),COLORBLUE;

DRAWTEXT(地量柱,VOL+3000,'地'),COLORBLUE;

BLZ:=VOL>REF(V,1)*1.9;

BLZ1:=VOL<REF(LLV(VOL,13),1);

BLZ2:=VOL<REF(LLV(VOL,55),1);

STICKLINE(BLZ,0,V,1,0),COLORYELLOW;

倍量柱:BLZ,COLORYELLOW;

DRAWTEXT(倍量柱,VOL+3000,'倍'),COLORYELLOW;

HJZ:=(3*C+H+L+O)/6;

HJZ2:=(8*HJZ+7*REF(HJZ,1)+6*REF(HJZ,2)+5*REF(HJZ,3)+4*REF(HJZ,4)+3*REF(HJZ,5)+2*REF(HJZ,6)+REF(HJZ,8))/36;

HJZ3:=VOL=HHV(VOL,10) AND VOL>2*REF(VOL,1) AND CLOSE>HJZ2 AND C>O;

黃金柱:FILTER(HJZ3,5),STICK,COLORRED,LINETHICK4;

STICKLINE(黃金柱,0,V,1,0),COLORRED;

DRAWTEXT(黃金柱,VOL+10000,'黃'),COLORRED;

價漲量縮:|,COLORGREEN;

FLZ:=V>REF(V,1)*0.98 AND V<REF(V,1)*1.02,LINETHICK0;

STICKLINE(FLZ,0,V,1,0),COLORMAGENTA;

DRAWTEXT(FLZ,VOL+3000,'平'),COLORMAGENTA;

平量柱:FLZ,COLORMAGENTA;

⑶ 通達信量柱指標

沒有出大問題，僅是「量柱」的寬度有點「寬」了，把相關句子的改為 3 即是常態寬度，例如：STICKLINE(C>=O,0,V, 3 ,1)。

⑷ 凹口平量柱的編輯選股源代碼是什麼我用的是通達信，謝謝！

網上搜索就有了。
XGX7:ABS((VOL-REF(VOL,7))/REF(VOL,7))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,7) AND
REF(VOL,2)<REF(VOL,7) AND
REF(VOL,3)<REF(VOL,7) AND
REF(VOL,(7-3))<REF(VOL,7) AND
REF(VOL,(7-2))<REF(VOL,7) AND
REF(VOL,(7-1))<REF(VOL,7);

XGX8:ABS((VOL-REF(VOL,8))/REF(VOL,8))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,8) AND
REF(VOL,2)<REF(VOL,8) AND
REF(VOL,3)<REF(VOL,8) AND
REF(VOL,(8-3))<REF(VOL,8) AND
REF(VOL,(8-2))<REF(VOL,8) AND
REF(VOL,(8-1))<REF(VOL,8);

XGX9:ABS((VOL-REF(VOL,9))/REF(VOL,9))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,9) AND
REF(VOL,2)<REF(VOL,9) AND
REF(VOL,3)<REF(VOL,9) AND
REF(VOL,(9-3))<REF(VOL,9) AND
REF(VOL,(9-2))<REF(VOL,9) AND
REF(VOL,(9-1))<REF(VOL,9);

XGX10:ABS((VOL-REF(VOL,10))/REF(VOL,10))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,10) AND
REF(VOL,2)<REF(VOL,10) AND
REF(VOL,3)<REF(VOL,10) AND
REF(VOL,(10-3))<REF(VOL,10) AND
REF(VOL,(10-2))<REF(VOL,10) AND
REF(VOL,(10-1))<REF(VOL,10);

XGX11:ABS((VOL-REF(VOL,11))/REF(VOL,11))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,11) AND
REF(VOL,2)<REF(VOL,11) AND
REF(VOL,3)<REF(VOL,11) AND
REF(VOL,(11-3))<REF(VOL,11) AND
REF(VOL,(11-2))<REF(VOL,11) AND
REF(VOL,(11-1))<REF(VOL,11);

XGX12:ABS((VOL-REF(VOL,12))/REF(VOL,12))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,12) AND
REF(VOL,2)<REF(VOL,12) AND
REF(VOL,3)<REF(VOL,12) AND
REF(VOL,(12-3))<REF(VOL,12) AND
REF(VOL,(12-2))<REF(VOL,12) AND
REF(VOL,(12-1))<REF(VOL,12);

DRAWTEXT(XGX7,1.1,'7日平量柱');
DRAWTEXT(XGX8,1,'8日平量柱');
DRAWTEXT(XGX9,0.9,'9日平量柱');
DRAWTEXT(XGX10,0.8,'10日平量柱');
DRAWTEXT(XGX11,0.7,'11日平量柱');
DRAWTEXT(XGX12,0.6,'12日平量柱');

⑸ 求通信達13天或50天內有低量柱的選股公式

量13天最低:LLV(V,13)=L;

量50天最低:LLV(V,50)=L;

上面兩個公式任選一個,先做成副圖看信號,指向的是不是你要的樣子的量柱

---------------------------------------------

xypeng888朋友:麻煩你寫一個選股公式,不是指標公式,謝謝!!

-------------------------------------------------

前面做的放到條件選股公式里就是選股公式了,

另:技術指標通過"綜合選股"也可以用來選股的

------------------------------

下圖是其中一個

⑹ 請老司機寫平量柱選股公式

A1:=RANGE(V/REF(V,1),0.75,1.25);
A2:=C>REF(C,1) AND C>O;
XG:BARSLASTCOUNT(A1)>=3 AND BARSLASTCOUNT(A2)>=3;

⑺ 求通信達10天和7天內有平量柱的選股公式

選股:(hhv(v,N)-llv(v,N))*100/llv(v,N)<=3;
{說明：上式為N天內有平量柱的選股公式，可根據需要自行修改}

⑻ 如何把黑馬王子量柱擒漲停指標公式導入通達信