macd顶底背离自动化线公式指标

❶ 求通达信MACD连续1次或以上《顶底背离》后，金叉或死叉出买卖信号指标及选股公式

你要的公抄式没办法分辨！要自己分辨
MACD底背离
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
QZQ:=BARSLAST(REF(MACD,1)<0 AND MACD>0);
QM:=LLVBARS(MACD,QZQ+20);
MQDZ:=IF(QM>QZQ,REF(MACD,QM),0);
XG1:=MACD<0 AND MACD>MQDZ
AND CLOSE=LLV(CLOSE,QZQ+20) AND MQDZ<0;
XG:REF(XG1,1)=1 AND MACD>REF(MACD,1);
或者 {XG:REF(XG1,1)=1 AND MACD>REF(MACD,1)AND DIFF>REF(DIFF,10);}

❷ 求高手帮忙设：通达信macd 顶底背离+画线公式，如图，图片来自同花顺，万分感激！

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;

DRAWICON(CROSS(DIF,DEA),DEA,1);
DRAWICON(CROSS(DEA,DIF),DEA,2);
DU:=BARSLAST(CROSS(DIF,DEA));
DD:=BARSLAST(CROSS(DEA,DIF));
TJ1:=DEA<0ANDDU=0ANDREF(DEA,REF(DU,1))<DEAANDREF(C,REF(DU,1))>C;
STICKLINE(EVERY(UPNDAY(DU,1),DU),REF(DEA,DU),REF(DEA,DU),5,-1),COLORLIGRAY;
STICKLINE(TJ1,REF(DEA,REF(DU+1,1)),DEA,1,0),COLORLIGRAY;
DRAWTEXT(TJ1,REF(DEA,REF(DU,1)),'底背离'),COLORLIGRAY;
TJ2:=DEA>0ANDDD=0ANDREF(DEA,REF(DD,1))>DEAANDREF(C,REF(DD,1))<C;
STICKLINE(EVERY(UPNDAY(DD,1),DD),REF(DEA,DD),REF(DEA,DD),5,-1),COLORLIGRAY;
STICKLINE(TJ2,REF(DEA,REF(DD+1,1)),DEA,1,0),COLORLIGRAY;
DRAWTEXT(TJ2,REF(DEA,REF(DD,1)),'顶背离'),COLORLIGRAY;

❸ MACD顶底画线指标公式为什么出现行一缺少

DIF:EMA(CLOSE,12)-EMA(CLOSE,26)LINETHICK2;
DEA:EMA(DIF,9)LINETHICK2;
MACD:(DIF-DEA)*2,COLORSTICK;
STICKLINE(MACD>0,0,MACD,1,0),COLORRED;
STICKLINE(MACD<0,0,MACD,1,0),COLORGREEN;
STICKLINE(MACD>0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORYELLOW;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORWHITE;
ABC:=DRAWLINE(DIF>=HHV(DIF,13),DIF,C<=LLV(C,13),DIF,0);
P13:=(ABC-DIF);
STICKLINE(P13=0,DEA,DIF,1,1),COLORLIMAGENTA;
STICKLINE(P13=0,0.2,0.25,1,1),COLORGREEN;

公式通达信可用回。答

❹ 求助高手MACD指标顶（底）背离量化公式

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
Zero : 0;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORFF00FF;
DRAWTEXT(底背离,-0.2,' 底背离'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),colorgreen;
DRAWTEXT(顶背离,DEA*1.15,'顶背离'),colorwhite;
DRAWICON(CROSS(DIFF,DEA),DEA,'BUY');
DRAWICON(CROSS(DEA,DIFF),DEA,'SELL');

❺ 编了个类似macd的指标，如何编写柱状部分的顶底背离公式，比如出现下图走势，在圆圈处出现背离提示

设定一个短周期和一个长周期, 然后分别对价格和你的指标进行高低值比较.
比如版短期是两周(10日), 长期是两个月权(40日), 那么
HHV(close,10)=HHV(close,40)的同时, 你指标hhv10却不是hhv40, 即是指标没跟着价格一起高, 就可能有顶背, 这样选出来虽混杂了少许不太像的图形, 但肯定没有漏网, 而且初选后我们用肉眼筛这种背离实在很轻松.

❻ 哪位老师有通达信MACD柱体背离的指标公式分享一个，真心感谢

可以编写macd柱体的顶底背离指标，你是判断macd长短的背离还是判断macd柱面积的背离，再有你所说的颜色变化，用什么颜色怎么变化没明白什么意思有图吗。

下图是macd柱顶底背离画线指标。

❼ 有谁帮忙写一个macd周线底背离三次的指标公式

你想编写底背抄离指标首先要说袭明这底背离的判断方法还有具体判断什么，macd从内容上底背离就分为，dif背离，dea背离，macd柱背离，macd面积背驰，金叉位置背离，从判断上又分隔峰临峰，形式可以多种多样，你具体如何判断要说明清楚才能编写公式。

❽ 求:60分钟MACD底背离指标公式

你好，
我给你的是幅图公式，MACD背离
DIFF
:
EMA(CLOSE,SHORT)
-
EMA(CLOSE,LONG);
DEA
:
EMA(DIFF,M);
MACD
:
2*(DIFF-DEA),
COLORSTICK,COLOR5454FF;
DD:=C=HHV(C,180);
EE:=DEA<
REF(DEA,1)
AND
REF(DEA<
REF(DEA,1),1)=1;
CC:=C>
REF(C,1)
AND
REF(C>
REF(C,1),1)=1;
上升背离CC
AND
EE)*DEA,COLOR00FFFF;
顶背离DD
AND
EE
AND
DEA<
HHV(DEA,180))*DEA,STICK,LINETHICK3,COLORGREEN;
FF:=C=LLV(C,180);
GG:=
DEA>
REF(DEA,1)
AND
REF(DEA>
REF(DEA,1),1)=1;
LL:=C<
REF(C,1)
AND
REF(C<
REF(C,1),1)=1;
下降背离LL
AND
GG)*DEA,COLORMAGENTA;
底背离FF
AND
GG
AND
DEA>
LLV(DEA,180))*DEA,STICK,LINETHICK3,COLORRED;
MM:=IF(MACD<
0,MACD,0);
JJ:=MM>
REF(MM,1);
ZZ:=REF(JJ,1)=1;
介入区JJ
AND
ZZ)*DEA,POINTDOT,COLORRED;{MACD蓝柱缩短---指今日比昨天短}
STICKLINE(介入区=DEA,DEA,DIFF,3,0),COLORRED;
DRAWTEXT(CROSS(DIFF,DEA
),0,'金\N叉'),COLORCYAN;
DRAWTEXT(CROSS(DEA,DIFF
),0,'死叉'),COLORGREEN;
参考资料：股侠AAA原创，转载请注明，

❾ 求MACD顶底背离指标公式参数设置

这个参数要看你自己的习惯，一般来说系统默认的参数即可。