⑴ 在哪里能找到通达信分时t+0准确买卖副图指标 准确率99% 源码
准确率这么高的不存在，因为涨跌图是人为做出来的，任何线庄家也能做出来，
⑵ 求同花顺(奇准买卖)指标代码!!知道的告诉我,十分感谢!!
是这个吧
{买卖奇准}
昨日价:=MA(CLOSE,1);
中价:=(LOW+HIGH+CLOSE)/3;
均价:=MA(中价,5);
最高:=HHV(均价,10);
ZTJ:=HHV((昨日价<最高),5);
ZMTJ:=IF(ZTJ AND YM3,0,1);
急卖奇版准:IF(ZTJ,100,97),LINETHICK2,COLORGREEN;
中价均价:= MA(中价,5);
买卖权:=LLV(中价均价,10);
急买奇准:IF(LLV((昨日价<买卖),5),50,0),COLORRED;
⑶ 请求高手把这个【精准买卖】指标公式改为条件选股公式，成功率蛮高的，而且无未来函数。（能改进更好）
这个就是简单地MACD选股啊，中间那几个划线一删就内是了：
DIFF:=EMA(DCLOSE,12)-EMA(DCLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=(DIFF-DEA)*2;
买入:CROSS(DIFF,DEA);
卖出容:CROSS(DEA,DIFF);
⑷ 下面是一个通达信指标公式，太准了，肯定有未来函数。请高手去掉未来函数
B:ZIG(3,50/5)*100,COLORWHITE;
ZIG为未来函数.
不能去掉。未来函数是这种公式的灵魂。
⑸ 大智慧精准买卖指标公式源码谢谢哈~
MA5:MA(CLOSE,5);
MA10:MA(CLOSE,10);
MA20:MA(CLOSE,20);
MA40:MA(CLOSE,40);
ma60:ma(c,60);
ma120:ma(c,120);
ma250:ma(c,250),coloryellow;
月价托:=ma5>ma20 and ma5>ma10 and cross(ma10,ma20),coloryellow ;
季价托:=ma20>ma60 and ma20>ma40 and cross(ma40,ma60),colorf00ff0 ;
短、长价托:=ma5>ma60 and ma5>ma10 and cross(ma10,ma60),colorred;
drawtext(月价托,l,'月价托'),coloryellow;
stickline(月价托,l,h,0.5,1), coloryellow;
stickline(月价托,o,c,5,1),linethick3, coloryellow;
drawtext(季价托,l,'季价托'),colorf00ff0;
stickline(季价托,l,h,0.5,1), colorf00ff0;
stickline(季价托,o,c,5,1),linethick3, colorf00ff0;
drawtext(短、长价托,l,'短、长价托'),color36c0c1;
stickline(短、长价托,l,h,0.5,1), color36c0c1;
stickline(短、长价托,o,c,5,0),linethick3, color36c0c1;
vol1:=MA(VOL,5),colorwhite;
vol2:=MA(VOL,10),coloryellow;
vol3:=MA(VOL,20),colorff00ff ;
量托:=vol1>=vol3 and cross(vol2,vol3) and ref(vol2,1)<ref(vol3,1);
drawtext(量托,l,'▲'),colorwhite;
drawtext(量托,l*0.97,'量托'),colorwhite;
stickline(量托,l,h,0.5,1), colorwhite;
stickline(量托,o,c,5,1),linethick3, colorwhite;
aa:=BARSLAST(ma60>ma40 and (ma40=ma20 or ma40>ma20));
bb:=ref(count(c<ma60,aa)=aa,1);
cc:=cross(c,ma60) and vol>ma(vol,5) and (c-ref(c,1))/ref(c,1)*100>3;
芙蓉出水:=bb and cc,color00ff00;
drawtext(芙蓉出水,h*1.05,'★'),color00ff00;
drawtext(芙蓉出水,h*1.02,'芙蓉出水'),color00ff00;
stickline(芙蓉出水,h,l,0.5,0),color00ff00;
stickline(芙蓉出水,o,c,5,0),color00ff00,linethick2;
⑹ 求股票公式高手帮忙整合股票指标公式
强烈要求+分！！！
重新修改了一下，把蛮准的红色信号修改成了用白色方块覆盖K线的形式显示出来了，还是直接复制下面的内容：
{第一个}
C3:=REF(C,1);
涨停:=IF((C-C3)*100/C3>=(10-0.01*100/C3),2,0);
STICKLINE(涨停,OPEN,CLOSE,5,0),COLORRED;
跌停:=IF((C3-C)*100/C3>=(10-0.01*100/C3),2,0);
STICKLINE(跌停,OPEN,CLOSE,5,0),COLORGREEN;
{第二个}
LC:=REF(CLOSE,1);
RSI:=SMA(MAX(CLOSE-LC,0),4.1,1)/SMA(ABS(CLOSE-LC),4.1,1)*100;
蛮准:=CROSS(RSI,11)*80;
STICKLINE(蛮准,OPEN,CLOSE,5,0),colorwhite;
{第三个}
M5:MA(CLOSE,5);
M10:MA(CLOSE,10);
M20:MA(CLOSE,20);
M60:MA(CLOSE,60);
BB:=REF(INDEXC,1)<REF(INDEXC,2) AND REF(C,2)*0.95>=REF(C,1) AND REF(O,1)/REF(C,1)>=1.05
AND REF(C,1)<REF(O,1) AND C>O AND C/O>=1.05 AND C>REF(O,1)
AND REF(VOL,1)<REF(VOL,2);
STICKLINE(BB,O,C,4,0),COLORRED;
STICKLINE(BB,O,H,0,0),COLORRED;
STICKLINE(BB,L,C,0,0),COLORRED;
DRAWTEXT(BB,L*0.98,'追！'),COLORYELLOW;
VAR1:=4*SMA((CLOSE-LLV(LOW,5))/(HHV(HIGH,5)-LLV(LOW,5))*100,5,1)-
3*SMA(SMA((CLOSE-LLV(LOW,5))/(HHV(HIGH,5)-LLV(LOW,5))*100,5,1),3.2,1);
VAR2:=8;
CC:=CROSS(VAR1,VAR2);
DRAWTEXT(CC,L*0.98,'买！'),COLOR0099FF;
TYP:=(H+L+C)/3;
TYP1:=(TYP-MA(TYP,14))/(0.015*AVEDEV(TYP,14))<=20 AND REF(MA(C,21),1)<MA(C,21);
TJ1:=O<MAX(REF(C,1),REF(O,1));
TJ2:=REF(C,1)>=MA(C,21) AND L/MA(C,21)>=1.015 AND MA(C,144)>MA(C,250) AND V<MA(V,10) AND MIN(REF(V,2),REF(V,1))>V;
TJ3:=REF(MA(C,250),90)<REF(MA(C,144),90) AND MA(C,144)>MA(C,250) AND O>MA(C,250);
TJ4:=MAX(REF(H,10)AND REF(H,9)AND REF(H,8)AND REF(H,7), REF(H,6));
TOUJI:=TYP1 AND TJ1 AND TJ2 AND REF(C,2)/REF(O,2)<1.06 AND C/O<=1.05 AND HHV(H,5)/LLV(L,30)>=1.65 AND REF(H,5)/REF(L,1)>=1.15 AND REF(C,1)/REF(O,1)<=0.995 AND (L<REF(L,2) OR (REF(H,2)-REF(L,2))/(H-L)>=2) AND O/REF(L,1)<=1.04
OR TYP1 AND TJ1 AND O/REF(L,1)<1.05 AND REF(L,1)/REF(O,4)<=0.85 AND REF(C,1)/REF(O,1)<=1.03 AND O<REF(C,1) AND HHV(H,5)/LLV(L,35)>1.35 AND V<MA(V,10);
TOUJI2:=TYP1 AND TJ1 AND TJ2 AND O/REF(L,1)<1.05 AND O/LLV(L,3)<1.1 AND REF(C,1)/REF(0,1)<=1.05 AND HHV(H,4)/LLV(L,16)>=1.35 AND REF(O,4)/REF(C,2)>=1.08 AND REF(C,2)/REF(O,2)<=0.995 AND (REF(L,2)<REF(L,3) OR (REF(H,3)-REF(L,3))/(REF(H,1)-REF(L,1))>=2) AND L<MIN(REF(C,1),REF(O,1))
OR TYP1 AND TJ1 AND HHV(H,10)/LLV(L,25)>=1.3 AND REF(C,5)<REF(H,5) AND REF(C,4)<REF(C,5) AND REF(C,3)<REF(C,4) AND REF(C,2)<REF(C,3) AND REF(C,1)<REF(C,2) AND L<REF(L,1) AND M5/O<1.1;DATOUJI:=TYP1 AND TJ3 AND O<REF(C,5) AND O<=REF(C,1) AND REF(H,10)/O>=1.17 AND HHV(H,10)/LLV(L,30)>1.4 AND (MA(V,10)/HHV(V,10)>0.5 AND V/HHV(V,10)>0.2 AND V/HHV(V,10)<0.4 OR REF(V,3)>REF(V,2) AND REF(V,2)>REF(V,1)) AND REF(C,1)/REF(C,2)<=1.02;
DATOUJI1:=TYP1 AND TJ3 AND O<REF(L,6) AND O<MIN(REF(C,5)AND REF(O,5),5) ;
DRAWTEXT(CROSS(MA(VOL,10),MA(VOL,20)) AND MA(VOL,5)>MA(VOL,10) AND L<MA(C,20) AND C>=MA(C,20),L*0.98,'量托'),COLORWHITE;
卖出:=CROSS(90,SMA(MAX(CLOSE-REF(CLOSE,1),0),6,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),6,1)*100);
DRAWTEXT(卖出,H*1.05,'短卖'),COLORGREEN;
W1:=C=HHV(C,20);
W2:=BARSLAST(W1);
W3:=IF(W2>0,REF(C,W2),REF(C,W2));
W4:=CROSS(C,REF(W3,1));
突破盘整:=W4 AND COUNT(W4,5)=1;
DRAWICON(突破盘整,L-0.10,1);
{到此结束}
---------------------------------------------------------------------------------
三个指标，主要是第一个和第三指标的源码里有几条都是重复的，所以我删了一部分，但绝对不影响修改之前的效果，这点可以放心。
飞鹰猎庄这个指标，里面有一句本身就不能在软件里显示：
DRAWTEXT(TOUJI OR TOUJI2 OR DATOUJI OR DATOUJI1,L*0.98,'△'),COLORYELLOW;
我发现这句在L2软件里也不会显示，所以干脆删除。
呼，这个还是比较复杂的........反正弄好了，你看看能不能用？？？
⑺ 求100%准指标公式改成选股公式
很明确的告诉你macd很容易发生变形，根本不会出现你所说的100%准 ；
你想要什么样的信号就用什么信号的条件选，
例如DRAWICON(顶背离,0.2+MACD,6),COLORWHITE; 这个信号的条件就是里面的“顶背离”即“REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF)”
如果用这个选股的话可以这样
XG:REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
这样就行了，也就是当XG的值等于1的时候就是满足条件的
用这个
DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9),COLORFFFF00;
MACD:(DIFF-DEA)*2;
STICKLINE(MACD>=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORRED;
STICKLINE(MACD>=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORGREEN;
STICKLINE(MACD<=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORFF00FF;
STICKLINE(MACD<=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLOR00FFFF;
多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
{DRAWICON(多转空,MACD,2); }
{DRAWICON(空转多,MACD,1); }
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.2,2,0),COLORFF00FF;
{DRAWICON(二次金叉,DEA*1.06,9),COLORRED; }
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
{DRAWICON(底背离,-0.2-MACD,5),COLORWHITE; }
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
{DRAWICON(顶背离,0.2+MACD,6),COLORWHITE;}
sell:顶背离 or 底背离;
buy:二次金叉;
我是在飞狐上做的，其他股软是否兼容我就不确定了