通達信ASI背離指標公式

A. 通達信cci全背離指標公式怎樣用

一般背離是有兩種，，，，頂背賣出，底背離買入 ，3385478641

B. 通達信背離指標

通達信背離指標 有很多的常用普通指標比如 MACD KJD RSI OBV 等等 指標只是參考 不能根據一個指標背離就馬上買入或者賣出

C. 求助！！通達信RSI背離選股公式

底背離可以用很多種方法認定,例如用時間,也就是第一段時間的和第二段版時間中rsi指標最權低值在上升,價格同時期在下降,還有是兩次死叉過程中產生的低點做對比,發現背離.
背離是一種形態分析的方法
想把背離編輯成選股公式,需要你先確認你是如何判斷背離標準的.把判斷的方法轉換成具體的條件.
例如圖中的rsi背離劃線指標.是根據兩次死叉時發生的最低點判斷的,在金叉發生時,提示前面產生過背離.
圖片中就的效果就是

黃色箭頭是差值大於10 白色箭頭是單純比大小

參數n是最近幾日除以除以2的結果,如果是最近6日參數就填3就行了

N:=3;
XG1:LLV(RSI.RSI1,N)>REF(LLV(RSI.RSI1,N),N-1)ANDLLV(L,N)<REF(LLV(L,N),N-1);
XG2:LLV(RSI.RSI1,N)-REF(LLV(RSI.RSI1,N),N-1)>10ANDLLV(L,N)<REF(LLV(L,N),N-1);

想用哪個就把另一個冒號後加個等號就可以了

這種背離判斷過於簡單,准確率沒測過不知道

D. 求助：通達信背離王劃線並選股公式

A1:=FORCAST(EMA(CLOSE,5),6);
A2:=FORCAST(EMA(CLOSE,8),6);
A3:=FORCAST(EMA(CLOSE,11),6);
A4:=FORCAST(EMA(CLOSE,14),6);
A5:=FORCAST(EMA(CLOSE,17),6);
B:=A1+A2+A3+A4-4*A5;
TOWERC:=EMA(B,2);
FORCAST(EMA(B,3),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,4),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,5),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,6),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,7),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,8),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,9),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,10),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,11),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,12),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,13),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,14),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,15),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,16),6),POINTDOT,COLORGREEN;
FORCAST(EMA(B,17),6),POINTDOT,COLORGREEN;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),8,0),COLORRED;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),8,0),COLORGREEN;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),5,0),COLORRED;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),3,0),COLORRED;
STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),0,0),COLORRED;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),8,0),COLORGREEN;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),5,0),COLORGREEN;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),2,0),COLORGREEN;
STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),0,0),COLORGREEN;
選股

A1:=FORCAST(EMA(CLOSE,5),6);
A2:=FORCAST(EMA(CLOSE,8),6);
A3:=FORCAST(EMA(CLOSE,11),6);
A4:=FORCAST(EMA(CLOSE,14),6);
A5:=FORCAST(EMA(CLOSE,17),6);
B:=A1+A2+A3+A4-4*A5;
TOWERC:=EMA(B,2);
XG:TOWERC>=REF(TOWERC,1) AND REF(TOWERC,1)<REF(TOWERC,2);

E. 通達信MACD底背離選股公式

股價創30日新低:l<=llv(l,30);
當日MACD（就是那個紅綠柱子）值大於昨日:"macd.macd」>ref("macd.macd",1);
當日DIFF（白線） 沒創新低:"macd.dif">=ref("macd.dif",1);

選股1:l<=LLV(l,30) AND "MACD.MACD">REF("MACD.MACD",1);
選股2:l<=LLV(l,30) AND "MACD.DIF">=REF("MACD.DIF",1);

選股3:l<=LLV(l,30) AND "MACD.MACD">REF("MACD.MACD",1) and
"MACD.DIF">=REF("MACD.DIF",1);

F. 求 通達信 MACD 頂背離 和 頂部二次背離 選股公式：

SQX:=(C-MA(CLOSE,13))*100; DIFF:EMA(MA(SQX,7),1),COLOR00FFFF; DEA:EMA(DIFF,7),COLORFF33FF; MACD:(DIFF-DEA)*2,COLORSTICK; 低位金叉:IF(CROSS(DIFF,DEA) AND DIFF<-0.1,0.3,0),COLORYELLOW,POINTDOT; STICKLINE(低位金叉,0,15,8,0),COLORYELLOW;DRAWICON(低位金叉,0.3,1); JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0)); 二次金叉:IF(CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1,0.2,0),COLORFF00FF,POINTDOT; STICKLINE(二次金叉,30,15,8,0),COLORFF00FF; A1:=BARSLAST(REF(CROSS(DIFF,DEA),1)); 底背離:IF(REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA),0.1,0),COLORRED,POINTDOT; STICKLINE(底背離,45,30,8,0),COLORRED;DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORRED; A2:=BARSLAST(REF(CROSS(DEA,DIFF),1)); 頂背離:REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF),COLORGREEN; DRAWLINE(A2=0,DEA,頂背離,DEA,0),COLORGREEN; A3:=CROSS(DIFF,DEA) AND DEA<0; 零下二次金叉:IF(FILTER(COUNT(A3,21)=2,10),0.05,0),COLORWHITE,POINTDOT; STICKLINE(零下二次金叉,45,60,8,0),COLORWHITE;

G. 請高手寫一個通達信MACD背離的選股公式。

A:=CROSS(MACD.DIF,MACD.DEA);
TS:=REF(BARSLAST(A),1);
A1:=C<REF(C,TS+1);
A2:=MACD.DIF>REF(MACD.DIF,TS+1);
A AND A1 AND A2;

H. 哪位老師有通達信MACD柱體背離的指標公式分享一個，真心感謝

偷懶，前一位弄的公式，給更正一下，其他內容紋絲沒內動。
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
DD:=C=HHV(C,180);
EE:=DEA< REF(DEA,1) AND REF(DEA< REF(DEA,1),1)=1;
CC:=C> REF(C,1) AND REF(C> REF(C,1),1)=1;
FF:=C=LLV(C,180);
GG:=DEA> REF(DEA,1) AND REF(DEA> REF(DEA,1),1)=1;
LL:=C< REF(C,1) AND REF(C< REF(C,1),1)=1;
底背容離:(FF AND GG AND DEA> LLV(DEA,180))*DEA;