通达信通道指标源码

① 请帮忙把两点一线+通道的指标公式改成通达信

LC:=REF(CLOSE,1);
B1:SMA(MAX(CLOSE-LC,0),4,1)/SMA(ABS(CLOSE-LC),4,1)*100-34,NODRAW;
A1:STICKLINE(CLOSE>=OPEN AND B1<34,CLOSE,OPEN,5,0),COLORCYAN;
A2:STICKLINE(CLOSE>=OPEN AND B1<34,HIGH,CLOSE,0,0),COLORCYAN;
A3:STICKLINE(CLOSE>=OPEN AND B1<34,OPEN,LOW,0,0),COLORCYAN;
A4:STICKLINE(CLOSE<OPEN AND B1<34,CLOSE,OPEN,5,0),COLORCYAN;
A5:STICKLINE(CLOSE<OPEN AND B1<34,HIGH,OPEN,0,0),COLORCYAN;
A6:STICKLINE(CLOSE<OPEN AND B1<34,LOW,CLOSE,0,0),COLORCYAN;
VAR0:=(CLOSE-LLV(LOW,32))/(HHV(HIGH,32)-LLV(LOW,32))*CLOSE;
VAR1:=EMA(VAR0,3);
VAR3:=EMA(VAR0,7);
HH:=HHV(VAR3,64);
LL:=LLV(VAR3,64);
VARHIGH:=IF(VAR1>=REF(HH,1),H,REF(H,BARSLAST(VAR1>=REF(HH,1))));
VARLOW:=IF(VAR1<=REF(LL,1),L,REF(L,BARSLAST(VAR1<=REF(LL,1))));
B5:PLOYLINE(VARHIGH=REF(VARHIGH,1),VARHIGH),COLORRED;
B2:PLOYLINE(VARLOW=REF(VARLOW,1),VARLOW),COLORGREEN;
B3:MA(C,21);
RSV:(HHV(HIGH,14)-CLOSE)/(HHV(HIGH,14)-LLV(LOW,14))*100,NODRAW;
A7:STICKLINE(CLOSE>=OPEN AND RSV<35,CLOSE,OPEN,5,1),COLORRED;
A8:STICKLINE(CLOSE>=OPEN AND RSV<35,HIGH,CLOSE,0,0),COLORRED;
A9:STICKLINE(CLOSE>=OPEN AND RSV<35,OPEN,LOW,0,0),COLORRED;
A10:STICKLINE(CLOSE<OPEN AND RSV<35,CLOSE,OPEN,5,1),COLORRED;
A11:STICKLINE(CLOSE<OPEN AND RSV<35,HIGH,OPEN,0,0),COLORRED;
A12:STICKLINE(CLOSE<OPEN AND RSV<35,LOW,CLOSE,0,0),COLORRED;
中轨:MA(CLOSE,10),COLORWHITE;
上轨:中轨+2*STD(CLOSE,10),COLORWHITE;
下轨:中轨-2*STD(CLOSE,10),COLORWHITE;
A13:STICKLINE(CLOSE>=OPEN AND CROSS(CLOSE,上轨) AND CLOSE/OPEN>1.09,CLOSE,OPEN,10,0);
A14:STICKLINE(CLOSE>=OPEN AND CROSS(CLOSE,上轨) AND CLOSE/OPEN>1.09,HIGH,CLOSE,0,0);
A15:STICKLINE(CLOSE>=OPEN AND CROSS(CLOSE,上轨) AND CLOSE/OPEN>1.09,OPEN,LOW,0,0);
A16:STICKLINE(CLOSE<OPEN AND CROSS(CLOSE,上轨) AND CLOSE/OPEN>1.09,CLOSE,OPEN,10,0);
A17:STICKLINE(CLOSE<OPEN AND CROSS(CLOSE,上轨) AND CLOSE/OPEN>1.09,HIGH,OPEN,0,0);
A18:STICKLINE(CLOSE<OPEN AND CROSS(CLOSE,上轨) AND CLOSE/OPEN>1.09,LOW,CLOSE,0,0);
{公式好象有点问题,通达信可能用了,但有时会缺少K线,不知道你这公式源码全不全}

② 通达信公式如何编写均线上下通道满足100个周期的K线95%在通道内

那就统计一来下100周期内,最高价小于自等于通道上轨道,最低价大于等于通道下轨的,的k线数量大于等于95不就可以了吗?
以ENE通道指标为例公式如下.
UPPER:=(1+6/100)*MA(CLOSE,25);
LOWER:=(1-6/100)*MA(CLOSE,25);
XG:COUNT(H<=UPPER AND L>=LOWER,100)>=95;

③ 有没有好一点的通达信主图通道指标

五日线:MA(CLOSE,5)COLORWHITE;
水平面:MA(CLOSE,60),COLORGREEN;
压力:MA(REF(HHV(H,30),1),2),COLORCYAN,DOTLINE;
支撑:MA(REF(LLV(L,30),1),2),COLORLIGRAY,DOTLINE;
根据思路编写公式，修改公式。盘中预警，条件选股。公式解版密，去除时权间限制。点我
图 像 可 (私) 信 订公式， 最后，轻轻的点一下采纳就好。

④ 通达信极品通道波段主图指标公式如何安装

这样的指标，还不如直接用股价大于20日均线加上涨百分之三。

⑤ 求 通达信原本 薛斯通道主图源码 还有参数怎么加

N:=13;
VAR2:=CLOSE*VOL;
VAR3:=EMA((EXPMA(VAR2,3)/EXPMA(VOL,3)+EXPMA(VAR2,6)/EXPMA(VOL,6)+EXPMA(VAR2,12)/EXPMA(VOL,12)+EXPMA(VAR2,24)/EXPMA(VOL,24))/4,N);
SUP:1.06*VAR3;
SDN:VAR3*0.94;
VAR44:=EXPMA(CLOSE,9);
LUP:EXPMA(VAR44*1.14,5);
LDN:EXPMA(VAR44*0.88,5);
参数不需要加，如果想修改，只需专要修改N的值就可以了属。

⑥ 通达信黄金通道指标源码怎么写就是有上轨下轨的蓝色的线，谢谢，真心感谢！

A1:=1;
A2:=1;
MID:(MA(CLOSE,3)+MA(CLOSE,6)+MA(CLOSE,12)+MA(CLOSE,24))/4,LINETHICK2;
UPPER:MID + (2 * (STD(CLOSE,20))),COLORYELLOW;
LOWER:MID - (2 * (STD(CLOSE,20))),COLORMAGENTA;
MID1:=MA(CLOSE,20),COLORWHITE;
UPPER1:MID1 + (2 * (STD(CLOSE,20))) ;
LOWER1:MID1 - (2 * (STD(CLOSE,20))),COLORRED;
A3:=((CLOSE - (LLV(LOW,9))) / ((HHV(HIGH,9)) - (LLV(LOW,9)))) * 100;
A4:=SMA(A3,3,1);
A5:=((SMA(A4,3,1)) * A1) * A2;
A6:=(3 * A4) - (2 * A5);

⑦ 通达信极品通道波段主图指标公式安装不起,是什么原因，哪位高手指点如何安装

公式指标安装不了首先你要提供公式指标的源码才能知道原因啊。

⑧ 请通达信软件编写高手编写一个【通道型】公式，谢谢了！

振幅:=(H-L)/REF(C,1)*100;

平均振幅:=MA(振幅,N)/4;

中间线:MA(C,N);

上轨:中间线+平均振幅;

下轨:中间线-平均振幅;

⑨ 通达信 区间震荡线 dpo指标源码

通达信区间震荡线指标源码是正确的。你不要乱动就可以使用。