平量柱指标公式_如何把黑马王子量柱擒涨停指标公式导入通达信

⑴ 要量柱擒住涨停公式和成交量公式有平量，地量，凹量的公式的那种谢谢能编写吗

平量是与来前一根量自柱持平或基本持平的两根或多根量柱持平。价升量平或价跌量平，是量柱中的“实战量价形态”有着支撑压力的用处,也是庄家攻击量.
地量是相对于大盘处于高位的天量而言，通过统计历史上股指处于高位、低位的成交量数据，可以发现，地量的标准有迹可循。衡量中级下跌行情是否见底的标准是：底部成交量要缩至顶部最高成交量的20%以内。如果成交量大于这个比例，说明股指仍有下跌空间；反之，则可望见底。

⑵ 如何把黑马王子量柱擒涨停指标公式导入通达信

{量柱擒涨停（黑马王子量柱理论）}

VOLUME:VOL,VOLSTICK;

|:COUNT(CLOSE>REF(CLOSE,1),2)=2 AND COUNT(VOL<REF(VOL,1),2)=2;

STICKLINE(|,0,V,1,0),COLORGREEN;

DRAWTEXT(|,VOL+3000,'降'),COLORGREEN;

T:=DYNAINFO(8)>0;

VO:VOL=LLV(VOL,100) AND T;

地量柱:T AND VO,COLORBLUE;

STICKLINE(地量柱,0,V,1,0),COLORBLUE;

DRAWTEXT(地量柱,VOL+3000,'地'),COLORBLUE;

BLZ:=VOL>REF(V,1)*1.9;

BLZ1:=VOL<REF(LLV(VOL,13),1);

BLZ2:=VOL<REF(LLV(VOL,55),1);

STICKLINE(BLZ,0,V,1,0),COLORYELLOW;

倍量柱:BLZ,COLORYELLOW;

DRAWTEXT(倍量柱,VOL+3000,'倍'),COLORYELLOW;

HJZ:=(3*C+H+L+O)/6;

HJZ2:=(8*HJZ+7*REF(HJZ,1)+6*REF(HJZ,2)+5*REF(HJZ,3)+4*REF(HJZ,4)+3*REF(HJZ,5)+2*REF(HJZ,6)+REF(HJZ,8))/36;

HJZ3:=VOL=HHV(VOL,10) AND VOL>2*REF(VOL,1) AND CLOSE>HJZ2 AND C>O;

黄金柱:FILTER(HJZ3,5),STICK,COLORRED,LINETHICK4;

STICKLINE(黄金柱,0,V,1,0),COLORRED;

DRAWTEXT(黄金柱,VOL+10000,'黄'),COLORRED;

价涨量缩:|,COLORGREEN;

FLZ:=V>REF(V,1)*0.98 AND V<REF(V,1)*1.02,LINETHICK0;

STICKLINE(FLZ,0,V,1,0),COLORMAGENTA;

DRAWTEXT(FLZ,VOL+3000,'平'),COLORMAGENTA;

平量柱:FLZ,COLORMAGENTA;

⑶ 通达信量柱指标

没有出大问题，仅是“量柱”的宽度有点“宽”了，把相关句子的改为 3 即是常态宽度，例如：STICKLINE(C>=O,0,V, 3 ,1)。

⑷ 凹口平量柱的编辑选股源代码是什么我用的是通达信，谢谢！

网上搜索就有了。
XGX7:ABS((VOL-REF(VOL,7))/REF(VOL,7))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,7) AND
REF(VOL,2)<REF(VOL,7) AND
REF(VOL,3)<REF(VOL,7) AND
REF(VOL,(7-3))<REF(VOL,7) AND
REF(VOL,(7-2))<REF(VOL,7) AND
REF(VOL,(7-1))<REF(VOL,7);

XGX8:ABS((VOL-REF(VOL,8))/REF(VOL,8))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,8) AND
REF(VOL,2)<REF(VOL,8) AND
REF(VOL,3)<REF(VOL,8) AND
REF(VOL,(8-3))<REF(VOL,8) AND
REF(VOL,(8-2))<REF(VOL,8) AND
REF(VOL,(8-1))<REF(VOL,8);

XGX9:ABS((VOL-REF(VOL,9))/REF(VOL,9))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,9) AND
REF(VOL,2)<REF(VOL,9) AND
REF(VOL,3)<REF(VOL,9) AND
REF(VOL,(9-3))<REF(VOL,9) AND
REF(VOL,(9-2))<REF(VOL,9) AND
REF(VOL,(9-1))<REF(VOL,9);

XGX10:ABS((VOL-REF(VOL,10))/REF(VOL,10))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,10) AND
REF(VOL,2)<REF(VOL,10) AND
REF(VOL,3)<REF(VOL,10) AND
REF(VOL,(10-3))<REF(VOL,10) AND
REF(VOL,(10-2))<REF(VOL,10) AND
REF(VOL,(10-1))<REF(VOL,10);

XGX11:ABS((VOL-REF(VOL,11))/REF(VOL,11))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,11) AND
REF(VOL,2)<REF(VOL,11) AND
REF(VOL,3)<REF(VOL,11) AND
REF(VOL,(11-3))<REF(VOL,11) AND
REF(VOL,(11-2))<REF(VOL,11) AND
REF(VOL,(11-1))<REF(VOL,11);

XGX12:ABS((VOL-REF(VOL,12))/REF(VOL,12))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,12) AND
REF(VOL,2)<REF(VOL,12) AND
REF(VOL,3)<REF(VOL,12) AND
REF(VOL,(12-3))<REF(VOL,12) AND
REF(VOL,(12-2))<REF(VOL,12) AND
REF(VOL,(12-1))<REF(VOL,12);

DRAWTEXT(XGX7,1.1,'7日平量柱');
DRAWTEXT(XGX8,1,'8日平量柱');
DRAWTEXT(XGX9,0.9,'9日平量柱');
DRAWTEXT(XGX10,0.8,'10日平量柱');
DRAWTEXT(XGX11,0.7,'11日平量柱');
DRAWTEXT(XGX12,0.6,'12日平量柱');

⑸ 求通信达13天或50天内有低量柱的选股公式

量13天最低:LLV(V,13)=L;

量50天最低:LLV(V,50)=L;

上面两个公式任选一个,先做成副图看信号,指向的是不是你要的样子的量柱

---------------------------------------------

xypeng888朋友:麻烦你写一个选股公式,不是指标公式,谢谢!!

-------------------------------------------------

前面做的放到条件选股公式里就是选股公式了,

另:技术指标通过"综合选股"也可以用来选股的

------------------------------

下图是其中一个

⑹ 请老司机写平量柱选股公式

A1:=RANGE(V/REF(V,1),0.75,1.25);
A2:=C>REF(C,1) AND C>O;
XG:BARSLASTCOUNT(A1)>=3 AND BARSLASTCOUNT(A2)>=3;

⑺ 求通信达10天和7天内有平量柱的选股公式

选股:(hhv(v,N)-llv(v,N))*100/llv(v,N)<=3;
{说明：上式为N天内有平量柱的选股公式，可根据需要自行修改}

⑻ 如何把黑马王子量柱擒涨停指标公式导入通达信