macd顶底九转指标公式

1. MACD顶底画线指标公式为什么出现行一缺少

DIF:EMA(CLOSE,12)-EMA(CLOSE,26)LINETHICK2;
DEA:EMA(DIF,9)LINETHICK2;
MACD:(DIF-DEA)*2,COLORSTICK;
STICKLINE(MACD>0,0,MACD,1,0),COLORRED;
STICKLINE(MACD<0,0,MACD,1,0),COLORGREEN;
STICKLINE(MACD>0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORYELLOW;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORWHITE;
ABC:=DRAWLINE(DIF>=HHV(DIF,13),DIF,C<=LLV(C,13),DIF,0);
P13:=(ABC-DIF);
STICKLINE(P13=0,DEA,DIF,1,1),COLORLIMAGENTA;
STICKLINE(P13=0,0.2,0.25,1,1),COLORGREEN;

公式通达信可用回。答

2. 求通达信中把MACD顶底背离信号叠加到分时主图上的公式源码

顶背离,你要确定一下是,dif的背离,还是,dea线的背离,还是macd柱子高低的背离.
提示方式是画线提示还是文字提示还是图标提示
例如下图中的是划线提示的

3. 通达信MACD公式，请高手请把下面指标公式里的金叉死叉+个箭头表示谢谢

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;
DRAWICON(二次金叉,DEA*0.9,1) ;
DRAWTEXT(二次金叉,0.1,' 二次金叉'),COLORYELLOW;
DRAWICON(CROSS(DIFF,DEA),DEA*1.02,1);
DRAWICON(CROSS(DEA,DIFF),DIFF*0.98,2);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA) AND DIFF<0;
STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK4;
DRAWTEXT(底背离,DIFF,' 底背离'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK4;

4. 求通达信MACD连续1次或以上《顶底背离》后，金叉或死叉出买卖信号指标及选股公式

你要的公抄式没办法分辨！要自己分辨
MACD底背离
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
QZQ:=BARSLAST(REF(MACD,1)<0 AND MACD>0);
QM:=LLVBARS(MACD,QZQ+20);
MQDZ:=IF(QM>QZQ,REF(MACD,QM),0);
XG1:=MACD<0 AND MACD>MQDZ
AND CLOSE=LLV(CLOSE,QZQ+20) AND MQDZ<0;
XG:REF(XG1,1)=1 AND MACD>REF(MACD,1);
或者 {XG:REF(XG1,1)=1 AND MACD>REF(MACD,1)AND DIFF>REF(DIFF,10);}

5. 通信达MACD顶底背离选股公式

学这些没用的

6. 求助高手MACD指标顶（底）背离量化公式

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
Zero : 0;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORFF00FF;
DRAWTEXT(底背离,-0.2,' 底背离'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),colorgreen;
DRAWTEXT(顶背离,DEA*1.15,'顶背离'),colorwhite;
DRAWICON(CROSS(DIFF,DEA),DEA,'BUY');
DRAWICON(CROSS(DEA,DIFF),DEA,'SELL');

7. 求大智慧MACD底背离和顶背离公式

[MACD顶底抄背离] 参数 short=12 long=26 m=9 n=55
DIFF:EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA:EMA(DIFF,M);
MACD:2*(DIFF-DEA), COLORSTICK;
底背离:LLV(L,N)=L AND NOT(LLV(MACD,N)=MACD),COLORFF00FF;
顶背离:HHV(H,N)=H AND NOT(HHV(MACD,N)=MACD),COLORFFFFFF;

8. 求高手编写大盘指数MACD周线顶底背离公式

顶背离或者底背离属于形态分析范畴，你要有具体的判断条件才能编写，你也没说版具体怎么判权断让别人怎么给你编写啊。

例如下面的macd背离画图主图与副图，要有具体判断条件才能编写。例如下图指标通过选择参数能对比dif值背离，dea值背离，macd柱背离，macd背驰。至于你想用在什么周期都可以，分钟，小时，日线，周线，月线等等都可以。