博易大师彩色macd指标公式

㈠ 如何在博易大师的MACD上加上顶背离和底背离标记

DIFF:EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA:EMA(DIFF,M);
MACD:2*(DIFF-DEA), COLORSTICK;
底背离:LLV(L,N)=L AND NOT(LLV(MACD,N)=MACD),COLORFF00FF;
顶背离:HHV(H,N)=H AND NOT(HHV(MACD,N)=MACD),COLORFFFFFF;

㈡ 求编程大师博易大师macd柱状图指标编写如何将红绿线在0轴两方，改成在0轴一方

请注意，MACD为负值时在0轴下面，为正值是在轴上面，改不了，这是指标属性造成的！
换了就不是MACD了！

㈢ 博易大师的分时图如何调用MACD指标

用一分钟K线看吧，分时应该没有办法指标

㈣ 请高手在博易大师软件中给予编写公式：macd在5日请高手在博易大师软件中给予编写公式：macd在5日内向上多

DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2,COLORSTICK;
COUNT(MACD>REF(MACD,1),5)>3;

㈤ 博易大师 自编1分钟和5分钟macd和kdj指标显示不全，只显示1分钟macd部分，其他不显示

这指标设编写有问题所以所以显示不正常。但没看出来提问者想把指标最后显示成什么样。

所以只能改一个大概形式，看一下是这种效果吗

㈥ 博易大师指标MACD的DIF线在0轴上为红色,DIF线在0轴下为白色的公式,且macd金叉死叉

DIFF : EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA : EMA(DIFF,M);
MACD : 2*(DIFF-DEA), COLORSTICK;
DIFF>0,1
DIFF<0,2
;

㈦ 求助：通达信MACD变色公式

_红柱:IF("MACD.MACD">REF("MACD.MACD",1),"MACD.MACD",DRAWNULL),STICK,COLORRED;
绿柱:IF("MACD.MACD"<REF("MACD.MACD",1),"MACD.MACD",DRAWNULL),
STICK,COLORYELLOW;
_抄底:ABS((CROSS("MACD.DIF","MACD.DEA")
&&"MACD.DEA"<=-0.07)*"MACD.DIF")*1.50,COLORLIMAGENTA;
_DIF:"MACD.DIF",COLORWHITE;
_DEA:"MACD.DEA",COLORYELLOW;
__强度:IF(_DIF>_DEA,_DIF,DRAWNULL),COLORRED,LINETHICK2;
_强度:IF(_DEA<_DIF,_DEA,DRAWNULL),COLORMAGENTA,LINETHICK2;
DRAWTEXT(ABS(_抄底)>0,_抄底*1.20,' 抄底'),COLORYELLOW;
DRAWICON(ABS(_抄底)>0,_抄底*1.10,4);
DRAWICON(CROSS(_DIF,_DEA),_DEA,1);
DRAWICON(CROSS(_DEA,_DIF),_DEA,2);

㈧ 求变色MACD指标代码通达信变色MACD指标和博易大师变色MACD指标，谢谢朋友们！

1、通达信变色MACD指标
DIFIF1:=EMA(C,12) - EMA(C,26);
DEAEA1:=EMA(DIFIF1,9);
MACD1:=2*(DIFIF1-DEAEA1),STICK;
MACD2:=EMA(MACD1,3);
STICKLINE(MACD1>MACD2 AND MACD1>0,0,MACD1,1,0),COLORRED;
STICKLINE(MACD1>MACD2 AND MACD1<0,0,MACD1,1,0),COLORGREEN;
STICKLINE(MACD1<MACD2,0,MACD1,1,0),COLORCBCBC0;
STICKLINE(MACD1>=0 OR MACD1<=0,0,0,50,1),COLORWHITE;
DIFIF1,COLORFFFFFF,LINETHICK2;
DEAEA1,COLORYELLOW,LINETHICK2;
MACD:MACD1,NODRAW,COLORMAGENTA;
上升:IF(DEAEA1>REF(DEAEA1,1),DEAEA1,DRAWNULL),COLORYELLOW,LINETHICK2;
下降:IF(DEAEA1<REF(DEAEA1,1),DEAEA1,DRAWNULL),COLOR227700,LINETHICK2;
上翘:IF(DIFIF1>REF(DIFIF1,1),DIFIF1,DRAWNULL),COLORFFFFFF,LINETHICK2;
下拐:IF(DIFIF1<REF(DIFIF1,1),DIFIF1,DRAWNULL),COLOR227700,LINETHICK2;
DRAWICON(CROSS(DIFIF1,DEAEA1),DEAEA1*1.00,5);
DRAWICON(CROSS(DEAEA1,DIFIF1),DEAEA1*1.00,6);

2、博易大师变色MACD指标
DIFIF1:=EMA(C,12)-EMA(C,26);
DEAEA1:=EMA(DIFIF1,9);
MACD1:=2*(DIFIF1-DEAEA1),STICK;
MACD:2*(DIFIF1-DEAEA1),COLORSTICK;
PARTLINE(DEAEA1>REF(DEAEA1,1),DEAEA1),COLORYELLOW,LINETHICK2;
PARTLINE(DEAEA1<REF(DEAEA1,1),DEAEA1),COLOR008800,LINETHICK2;
PARTLINE(DIFIF1>REF(DIFIF1,1),DIFIF1),COLORFFFFFF,LINETHICK2;
PARTLINE(DIFIF1<REF(DIFIF1,1),DIFIF1),COLOR008800,LINETHICK2;
DRAWICON(CROSS(DIFIF1,DEAEA1),DEAEA1*1.00,1);
DRAWICON(CROSS(DEAEA1,DIFIF1),DEAEA1*1.00,2);

㈨ 求高手帮忙改下博易大师macd变色。

DIFF:EMA(C,12)-EMA(C,26);
DEA :EMA(DIFF,9),COLORYELLOW;
MACD:=2*(DIFF-DEA);
STICKLINE(MACD<REF(MACD,1)AND MACD>0,0,MACD,1,0 ),COLOR008888;
STICKLINE(MACD>=REF(MACD,1)AND MACD>0,0,MACD,1,0 ),COLOR000088;
STICKLINE(MACD>REF(MACD,1)AND MACD<0,0,MACD,1 ,0 ),COLOR883388;
STICKLINE(MACD<=REF(MACD,1)AND MACD<0,0,MACD,1,0 ),COLOR008800;
希望是抄您需袭要的。祝您股市好运。

㈩ 博易大师MACD红绿柱怎么改公式变粗 谢谢各位前辈

DIFF : EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA : EMA(DIFF,M);
MACD : 2*(DIFF-DEA),COLORSTICK;
STICKLINE(MACD>0,0,MACD,2,0),COLOR6633FF;
STICKLINE(MACD<=0,0,MACD,2,0),COLORCCFF66;
-----------------------------------------------------------------------------
在你原代码后面加上上面的最后两句就行了