通达信精准背离指标源码

A. 哪位老师有通达信MACD柱体背离的指标公式分享一个，真心感谢

偷懒，前一位弄的公式，给更正一下，其他内容纹丝没内动。
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
DD:=C=HHV(C,180);
EE:=DEA< REF(DEA,1) AND REF(DEA< REF(DEA,1),1)=1;
CC:=C> REF(C,1) AND REF(C> REF(C,1),1)=1;
FF:=C=LLV(C,180);
GG:=DEA> REF(DEA,1) AND REF(DEA> REF(DEA,1),1)=1;
LL:=C< REF(C,1) AND REF(C< REF(C,1),1)=1;
底背容离:(FF AND GG AND DEA> LLV(DEA,180))*DEA;

B. 求通达信中把MACD顶底背离信号叠加到分时主图上的公式源码

顶背离,你要确定一下是,dif的背离,还是,dea线的背离,还是macd柱子高低的背离.
提示方式是画线提示还是文字提示还是图标提示
例如下图中的是划线提示的

C. 急急急！！！各位老师好！求有关通达信macd底背离的公式。

啥用没有的底背离，纯粹就是在浪费你的时间。

D. 请高手编写个通达信的简单公式：MACD红绿柱子背离

MACD顶底背离（同时包含KDJ背离，RSI背离）
公式如下：

DIFF:EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA),COLORSTICK;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
B1:=REF(C,A1+1)>C AND REF(DIFF,A1+1)<DIFF AND CROSS(DIFF,DEA);
A2:=BARSLAST(REF(CROSS("KDJ.K"(9,3,3),"KDJ.D"(9,3,3)),1));
B2:=REF(C,A2+1)>C AND REF("KDJ.K"(9,3,3),A2+1)<"KDJ.K"(9,3,3) AND CROSS("KDJ.K"(9,3,3),"KDJ.D"(9,3,3));
A3:=BARSLAST(REF(CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24)),1));
B3:=REF(C,A3+1)>C AND REF("RSI.RSI1"(6,12,24),A3+1)<"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24));
C1:=BARSLAST(REF(CROSS(DEA,DIFF),1));
D1:=REF(C,C1+1)<C AND REF(DIFF,C1+1)>DIFF AND CROSS(DEA,DIFF);
C2:=BARSLAST(REF(CROSS("KDJ.D"(9,3,3),"KDJ.K"(9,3,3)),1));
D2:=REF(C,C2+1)<C AND REF("KDJ.K"(9,3,3),C2+1)>"KDJ.K"(9,3,3) AND CROSS("KDJ.D"(9,3,3),"KDJ.K"(9,3,3));
C3:=BARSLAST(REF(CROSS("RSI.RSI2"(6,12,24),"RSI.RSI1"(6,12,24)),1));
D3:=REF(C,C3+1)<C AND REF("RSI.RSI1"(6,12,24),C3+1)>"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI2"(6,12,24),"RSI.RSI1"(6,12,24));
MACD底背:IF(B1>0,-0.1,0),COLORRED,POINTDOT;
KDJ底背:IF(B2>0,-0.1,0),COLORFF00FF,POINTDOT;
RSI底背:IF(B3>0,-0.1,0),COLORYELLOW,POINTDOT;
MACD顶背:IF(D1>0,0.1,0),COLOR00FF00,POINTDOT;
KDJ顶背:IF(D2>0,0.1,0),COLORFFCC66,POINTDOT;
RSI顶背:IF(D3>0,0.1,0),COLORWHITE,POINTDOT;
STICKLINE(B1>0,-0.1,0,2,0),COLORRED;
STICKLINE(B2>0,-0.1,0,2,0),COLORFF00FF;
STICKLINE(B3>0,-0.1,0,2,0),COLORYELLOW;
STICKLINE(D1>0,0.1,0,2,0),COLOR00FF00;
STICKLINE(D2>0,0.1,0,2,0),COLORFFCC66;
STICKLINE(D3>0,0.1,0,2,0),COLORWHITE;

E. 求 通达信 MACD 顶背离 和 顶部二次背离 选股公式：

SQX:=(C-MA(CLOSE,13))*100; DIFF:EMA(MA(SQX,7),1),COLOR00FFFF; DEA:EMA(DIFF,7),COLORFF33FF; MACD:(DIFF-DEA)*2,COLORSTICK; 低位金叉:IF(CROSS(DIFF,DEA) AND DIFF<-0.1,0.3,0),COLORYELLOW,POINTDOT; STICKLINE(低位金叉,0,15,8,0),COLORYELLOW;DRAWICON(低位金叉,0.3,1); JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0)); 二次金叉:IF(CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1,0.2,0),COLORFF00FF,POINTDOT; STICKLINE(二次金叉,30,15,8,0),COLORFF00FF; A1:=BARSLAST(REF(CROSS(DIFF,DEA),1)); 底背离:IF(REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA),0.1,0),COLORRED,POINTDOT; STICKLINE(底背离,45,30,8,0),COLORRED;DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED; A2:=BARSLAST(REF(CROSS(DEA,DIFF),1)); 顶背离:REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF),COLORGREEN; DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN; A3:=CROSS(DIFF,DEA) AND DEA<0; 零下二次金叉:IF(FILTER(COUNT(A3,21)=2,10),0.05,0),COLORWHITE,POINTDOT; STICKLINE(零下二次金叉,45,60,8,0),COLORWHITE;

F. 求通达信15分钟周期MACD底背离的选股公式

用日线的底背离公式，选择15分钟周期就可以了。

下图是macd底背离选股指标日线胜率回测截图

G. 求助！！通达信RSI背离选股公式

底背离可以用很多种方法认定,例如用时间,也就是第一段时间的和第二段版时间中rsi指标最权低值在上升,价格同时期在下降,还有是两次死叉过程中产生的低点做对比,发现背离.
背离是一种形态分析的方法
想把背离编辑成选股公式,需要你先确认你是如何判断背离标准的.把判断的方法转换成具体的条件.
例如图中的rsi背离划线指标.是根据两次死叉时发生的最低点判断的,在金叉发生时,提示前面产生过背离.
图片中就的效果就是

黄色箭头是差值大于10 白色箭头是单纯比大小

参数n是最近几日除以除以2的结果,如果是最近6日参数就填3就行了

N:=3;
XG1:LLV(RSI.RSI1,N)>REF(LLV(RSI.RSI1,N),N-1)ANDLLV(L,N)<REF(LLV(L,N),N-1);
XG2:LLV(RSI.RSI1,N)-REF(LLV(RSI.RSI1,N),N-1)>10ANDLLV(L,N)<REF(LLV(L,N),N-1);

想用哪个就把另一个冒号后加个等号就可以了

这种背离判断过于简单,准确率没测过不知道

H. 哪位老师有通达信MACD柱体背离的指标公式分享一个，真心感谢

可以编写macd柱体的顶底背离指标，你是判断macd长短的背离还是判断macd柱面积的背离，再有你所说的颜色变化，用什么颜色怎么变化没明白什么意思有图吗。

下图是macd柱顶底背离画线指标。