macd底拐指標源碼

❶ 請老師編寫一個MACD指標DIFF上拐變色公式

DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9),COLORYELLOW;
MACD:(DIF-DEA)*2,COLORSTICK;
PARTLINE(DIF,DIF>REF(DIF,1),RGB(255,0,0),DIF<REF(DIF,1),COLORWHITE);

同花順用的

❷ 通達信多空趨勢,kdj,macd,rsi頂底背離信號提示的指標源碼

可以編寫通達來信德多空趨勢自，kdj，macd，rsi，頂背離的指標，但這些條件你好說明清楚如何判斷，例如頂背離最少要有高點確認條件你才能判斷，這三個指標每個指標都不是一個輸出，都有3個具體對比哪個這些具體條件說明清楚才能編寫指標公式。

❸ 求通達信macd指標中包含:頂底背離、金叉死叉、macd上升紅色下降綠色帶箭頭，謝謝！

{通達信MACD頂底背離指標---供參考！}

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:EMA(DIFF,9);

MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;

STICKLINE(MACD>REF(MACD,1),0,MACD,1,0),COLOR0000FF;

STICKLINE(MACD<REF(MACD,1),0,MACD,1,0),COLOR00FF00;

DRAWICON(REF(MACD,2)>REF(MACD,1) AND MACD>REF(MACD,1),MACD-0.2,1);

DRAWICON(REF(MACD,2)<REF(MACD,1) AND MACD<REF(MACD,1),MACD+0.2,2);

低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;

STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;

DRAWTEXT(低位金叉,0.16,' 低位金叉'),COLORWHITE;

JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));

二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;

STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;

DRAWICON(二次金叉,DEA*0.9,5) ;

DRAWTEXT(二次金叉,0.2,' 二次金叉'),COLORYELLOW;

死叉:=CROSS(DEA,DIFF);

DRAWICON(死叉,DIFF+0.2,6) ;

金叉:=CROSS(DIFF,DEA);

DRAWICON(金叉,DEA-0.2,17) ;

A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));

底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);

STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;

DRAWTEXT(底背離,0.12,' 底背離'),COLORFF00FF;

A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));

頂背離:=REF(CLOSE,A2+1) AND CROSS(DEA,DIFF);

DRAWTEXT(低位金叉 AND 二次金叉 AND 底背離,0.25,'進場'),COLOR0000FF,LINETHICK2;

❹ 求:60分鍾MACD底背離指標公式

你好，
我給你的是幅圖公式，MACD背離
DIFF
:
EMA(CLOSE,SHORT)
-
EMA(CLOSE,LONG);
DEA
:
EMA(DIFF,M);
MACD
:
2*(DIFF-DEA),
COLORSTICK,COLOR5454FF;
DD:=C=HHV(C,180);
EE:=DEA<
REF(DEA,1)
AND
REF(DEA<
REF(DEA,1),1)=1;
CC:=C>
REF(C,1)
AND
REF(C>
REF(C,1),1)=1;
上升背離CC
AND
EE)*DEA,COLOR00FFFF;
頂背離DD
AND
EE
AND
DEA<
HHV(DEA,180))*DEA,STICK,LINETHICK3,COLORGREEN;
FF:=C=LLV(C,180);
GG:=
DEA>
REF(DEA,1)
AND
REF(DEA>
REF(DEA,1),1)=1;
LL:=C<
REF(C,1)
AND
REF(C<
REF(C,1),1)=1;
下降背離LL
AND
GG)*DEA,COLORMAGENTA;
底背離FF
AND
GG
AND
DEA>
LLV(DEA,180))*DEA,STICK,LINETHICK3,COLORRED;
MM:=IF(MACD<
0,MACD,0);
JJ:=MM>
REF(MM,1);
ZZ:=REF(JJ,1)=1;
介入區JJ
AND
ZZ)*DEA,POINTDOT,COLORRED;{MACD藍柱縮短---指今日比昨天短}
STICKLINE(介入區=DEA,DEA,DIFF,3,0),COLORRED;
DRAWTEXT(CROSS(DIFF,DEA
),0,'金\N叉'),COLORCYAN;
DRAWTEXT(CROSS(DEA,DIFF
),0,'死叉'),COLORGREEN;
參考資料：股俠AAA原創，轉載請註明，

❺ 如何編寫通達信macd主圖指標源碼

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;

❻ 誰能幫我編個macd底背離的選股公式，不盛感激！

MA1:=MA(CLOSE,5);
MA2:=MA(CLOSE,10);
DIF:=EMA(CLOSE,SHORT)-EMA(CLOSE,LONG);
DEA:=EMA(DIF,MID);
MACD:=(DIF-DEA)*2,COLORSTICK;
DIFF:=SUM(MA1-MA2,0);
SUMMACD:=SUM(MACD,0);
W1:=BARSLAST(CROSS(MA2,MA1))+1;
W2:=BARSLAST(CROSS(MA1,MA2))+1;
W3:=BARSLAST(CROSS(MACD,0))+1;
W4:=BARSLAST(CROSS(-MACD,0))+1;

趨勢力度:IF(K,SUMMACD-REF(SUMMACD,MIN(W3,W4)),DIFF-REF(DIFF,MIN(W1,W2)));
趨勢平均力度:趨勢力度/IF(K,(MIN(W3,W4)+1)/20,(MIN(W1,W2)+1)/20),COLORSTICK;
MAX趨勢平均力度:HHV(趨勢平均力度,34);
MIN趨勢平均力度:LLV(趨勢平均力度,34);
--------------------------------------------------------------------------------------------------------------------------------------------
K值可調，調成「0」是通過均線纏繞面積判斷背馳
調成「1」是通過macd面積判斷背馳。
白線為均線（或macd )到目前為止的面積，白線的拐點（即某一段的最大值（絕對值））是均線或macd面積。如果K調成1，紅綠柱為憑據趨勢力度。

此指標不是選股指標，是個副圖指標，因為選股指標需要判斷前後面積的大小，難度極大，不易做出，目前還沒發現有人能寫出來。

❼ 誰能用macd結合KDJ做短線選股，謝謝高手指點，請不要復制文章。。。

無語，樓上這么多說教的，你們真懂嗎？指標一個都沒用？那是你們沒學精，半桶水就敢在這里瞎忽悠？
先給樓主說說，指標你一定得先知道源碼的真正意義，然後就是研究指標運行的軌跡，找出常態運行和非常態運行的不同點已經出現規律，KDJ MACD作為最經典的指標自然有它的經典之處，真看得懂它的人少之又少，一般也就看看金叉死叉或者超買超賣高低位拐頭，簡直一竅不通。
仔細研究指標之前，先得知道一個真理，如果你研究過源碼就會知道，所有指標都是根據股價編寫的，也就是說股價的走勢決定指標的運行，指標是不能決定股價的，但他是一個很好的坐標和參照物，等你研究透了，多數時候一眼就能看出股價將要運行的方向，那時候你才算是入行了。
在你沒仔細研究之前，給你編寫出來的選股指標沒有任何意義，指標是死的，選出來的股你不會通過股價形態和指標位置以及量能變化進行甄別，成功率仍然不會超過50%，等你學到一定時候你自然知道怎麼處理了。

說了半天等於白說，給你寫了實際是拿來主義也是害你，自己先學，一定要仔細學精，否則與樓上各位無異。

❽ 跪求通達信冠軍MACD和冠軍背離線附圖指標源碼，那位大神給下！

{供參考}
{冠軍MACD+頂底背離畫線}
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD2:=2*(DIFF-DEA);
DU0:=CROSS(DIFF,0);
UD0:=CROSS(0,DIFF);
TDU0:=BARSLAST(DU0);
TUD0:=BARSLAST(UD0);
DU3:=REF(DU0,1);
UD3:=REF(UD0,1);
TDU3:=BARSLAST(DU3);
TUD3:=BARSLAST(UD3);
UDGLINE:=IF(TDU3<TUD3,REF(HHV(HIGH,2),TDU3),REF(LLV(LOW,2),TUD3));
JDU0:=REF(CLOSE,1)<=REF(UDGLINE,1) AND CLOSE>UDGLINE AND TDU0<TUD0;
JUD0:=REF(CLOSE,1)>=REF(UDGLINE,1) AND CLOSE<UDGLINE AND TUD0<TDU0;
JDU1:=JDU0 AND COUNT(JDU0,TDU0)=1;
JUD1:=JUD0 AND COUNT(JUD0,TUD0)=1;
STICKLINE(MACD2>=0,0,MACD2,1,1),COLOR0000FF;
STICKLINE(MACD2>=0 AND MACD2<REF(MACD2,1),0,MACD2,1,0),COLORGREEN;
STICKLINE(MACD2<0,0,MACD2,2,0),COLORFFFF00;
STICKLINE(MACD2<0 AND MACD2>REF(MACD2,1),0,MACD2,1,1),COLORFFFF00;
STICKLINE(CLOSE>0,0,0,1,0),COLOR808080;
DEFUT:=BARSLAST(CROSS(MACD2,0));
DEFDT:=BARSLAST(CROSS(0,MACD2));
DEFUL:=IF(MACD2>=0,HHV(MACD2,DEFUT+1),REF(HHV(MACD2,DEFUT+1),DEFDT+1));
DEFDL:=IF(MACD2<0,LLV(MACD2,DEFDT+1),REF(LLV(MACD2,DEFDT+1),DEFUT+1));
DEFU2L:=REF(DEFUL,DEFUT+1);
DEFD2L:=REF(DEFDL,DEFDT+1);
DRAWICON(LLV(MACD2,4)>0 AND MACD2<REF(MACD2,1) AND REF(MACD2,1)>REF(MACD2,2) AND REF(MACD2,2)>REF(MACD2,3),MACD2+0.38,9);
DRAWICON(HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3),MACD2-0.13,11);
DRAWICON((JUD1 OR BARSLAST(JDU1)>BARSLAST(JUD1)) AND MACD2>=0 AND REF(MACD2,1)<REF(DEFU2L,1) AND MACD2>DEFU2L,MACD2+0.50,5);
DRAWICON((JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1)) AND MACD2<0 AND REF(MACD2,1)>REF(DEFD2L,1) AND MACD2<DEFD2L,MACD2-0.14,6);
VAR111:=JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1);
VAR112:=HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3);
價因子:=IF(CLOSE/OPEN>1.06,2.5,0),COLORLIBLUE;
STICKLINE(價因子,0,1,1,1),COLORYELLOW;
量變線:=VOL/MA(VOL,5)COLORWHITE,LINETHICK2;
量因子:=IF(VOL/MA(VOL,5)>2,2.5,0);
STICKLINE(量因子,0,1,1,1),COLORYELLOW;
DRAWICON(CLOSE/OPEN>1.06,1,24);
DRAWICON(VOL/MA(VOL,5)>2,0.8,25);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORRED,LINETHICK4;
DRAWTEXT(底背離,0.12,' 底背離'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
頂背:DRAWLINE(A2=0,DEA,頂背離,DEA,0),COLORGREEN,LINETHICK4;
DRAWICON(CROSS(DIFF,DEA),DEA,1);
DRAWICON(CROSS(DEA,DIFF),DEA,2);