macd頂底背離自動化線公式指標

❶ 求通達信MACD連續1次或以上《頂底背離》後，金叉或死叉出買賣信號指標及選股公式

你要的公抄式沒辦法分辨！要自己分辨
MACD底背離
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
QZQ:=BARSLAST(REF(MACD,1)<0 AND MACD>0);
QM:=LLVBARS(MACD,QZQ+20);
MQDZ:=IF(QM>QZQ,REF(MACD,QM),0);
XG1:=MACD<0 AND MACD>MQDZ
AND CLOSE=LLV(CLOSE,QZQ+20) AND MQDZ<0;
XG:REF(XG1,1)=1 AND MACD>REF(MACD,1);
或者 {XG:REF(XG1,1)=1 AND MACD>REF(MACD,1)AND DIFF>REF(DIFF,10);}

❷ 求高手幫忙設：通達信macd 頂底背離+畫線公式，如圖，圖片來自同花順，萬分感激！

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;

DRAWICON(CROSS(DIF,DEA),DEA,1);
DRAWICON(CROSS(DEA,DIF),DEA,2);
DU:=BARSLAST(CROSS(DIF,DEA));
DD:=BARSLAST(CROSS(DEA,DIF));
TJ1:=DEA<0ANDDU=0ANDREF(DEA,REF(DU,1))<DEAANDREF(C,REF(DU,1))>C;
STICKLINE(EVERY(UPNDAY(DU,1),DU),REF(DEA,DU),REF(DEA,DU),5,-1),COLORLIGRAY;
STICKLINE(TJ1,REF(DEA,REF(DU+1,1)),DEA,1,0),COLORLIGRAY;
DRAWTEXT(TJ1,REF(DEA,REF(DU,1)),'底背離'),COLORLIGRAY;
TJ2:=DEA>0ANDDD=0ANDREF(DEA,REF(DD,1))>DEAANDREF(C,REF(DD,1))<C;
STICKLINE(EVERY(UPNDAY(DD,1),DD),REF(DEA,DD),REF(DEA,DD),5,-1),COLORLIGRAY;
STICKLINE(TJ2,REF(DEA,REF(DD+1,1)),DEA,1,0),COLORLIGRAY;
DRAWTEXT(TJ2,REF(DEA,REF(DD,1)),'頂背離'),COLORLIGRAY;

❸ MACD頂底畫線指標公式為什麼出現行一缺少

DIF:EMA(CLOSE,12)-EMA(CLOSE,26)LINETHICK2;
DEA:EMA(DIF,9)LINETHICK2;
MACD:(DIF-DEA)*2,COLORSTICK;
STICKLINE(MACD>0,0,MACD,1,0),COLORRED;
STICKLINE(MACD<0,0,MACD,1,0),COLORGREEN;
STICKLINE(MACD>0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORYELLOW;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORWHITE;
ABC:=DRAWLINE(DIF>=HHV(DIF,13),DIF,C<=LLV(C,13),DIF,0);
P13:=(ABC-DIF);
STICKLINE(P13=0,DEA,DIF,1,1),COLORLIMAGENTA;
STICKLINE(P13=0,0.2,0.25,1,1),COLORGREEN;

公式通達信可用回。答

❹ 求助高手MACD指標頂（底）背離量化公式

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
Zero : 0;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORFF00FF;
DRAWTEXT(底背離,-0.2,' 底背離'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
頂背:DRAWLINE(A2=0,DEA,頂背離,DEA,0),colorgreen;
DRAWTEXT(頂背離,DEA*1.15,'頂背離'),colorwhite;
DRAWICON(CROSS(DIFF,DEA),DEA,'BUY');
DRAWICON(CROSS(DEA,DIFF),DEA,'SELL');

❺ 編了個類似macd的指標，如何編寫柱狀部分的頂底背離公式，比如出現下圖走勢，在圓圈處出現背離提示

設定一個短周期和一個長周期, 然後分別對價格和你的指標進行高低值比較.
比如版短期是兩周(10日), 長期是兩個月權(40日), 那麼
HHV(close,10)=HHV(close,40)的同時, 你指標hhv10卻不是hhv40, 即是指標沒跟著價格一起高, 就可能有頂背, 這樣選出來雖混雜了少許不太像的圖形, 但肯定沒有漏網, 而且初選後我們用肉眼篩這種背離實在很輕松.

❻ 哪位老師有通達信MACD柱體背離的指標公式分享一個，真心感謝

可以編寫macd柱體的頂底背離指標，你是判斷macd長短的背離還是判斷macd柱面積的背離，再有你所說的顏色變化，用什麼顏色怎麼變化沒明白什麼意思有圖嗎。

下圖是macd柱頂底背離畫線指標。

❼ 有誰幫忙寫一個macd周線底背離三次的指標公式

你想編寫底背抄離指標首先要說襲明這底背離的判斷方法還有具體判斷什麼，macd從內容上底背離就分為，dif背離，dea背離，macd柱背離，macd面積背馳，金叉位置背離，從判斷上又分隔峰臨峰，形式可以多種多樣，你具體如何判斷要說明清楚才能編寫公式。

❽ 求:60分鍾MACD底背離指標公式

你好，
我給你的是幅圖公式，MACD背離
DIFF
:
EMA(CLOSE,SHORT)
-
EMA(CLOSE,LONG);
DEA
:
EMA(DIFF,M);
MACD
:
2*(DIFF-DEA),
COLORSTICK,COLOR5454FF;
DD:=C=HHV(C,180);
EE:=DEA<
REF(DEA,1)
AND
REF(DEA<
REF(DEA,1),1)=1;
CC:=C>
REF(C,1)
AND
REF(C>
REF(C,1),1)=1;
上升背離CC
AND
EE)*DEA,COLOR00FFFF;
頂背離DD
AND
EE
AND
DEA<
HHV(DEA,180))*DEA,STICK,LINETHICK3,COLORGREEN;
FF:=C=LLV(C,180);
GG:=
DEA>
REF(DEA,1)
AND
REF(DEA>
REF(DEA,1),1)=1;
LL:=C<
REF(C,1)
AND
REF(C<
REF(C,1),1)=1;
下降背離LL
AND
GG)*DEA,COLORMAGENTA;
底背離FF
AND
GG
AND
DEA>
LLV(DEA,180))*DEA,STICK,LINETHICK3,COLORRED;
MM:=IF(MACD<
0,MACD,0);
JJ:=MM>
REF(MM,1);
ZZ:=REF(JJ,1)=1;
介入區JJ
AND
ZZ)*DEA,POINTDOT,COLORRED;{MACD藍柱縮短---指今日比昨天短}
STICKLINE(介入區=DEA,DEA,DIFF,3,0),COLORRED;
DRAWTEXT(CROSS(DIFF,DEA
),0,'金\N叉'),COLORCYAN;
DRAWTEXT(CROSS(DEA,DIFF
),0,'死叉'),COLORGREEN;
參考資料：股俠AAA原創，轉載請註明，

❾ 求MACD頂底背離指標公式參數設置

這個參數要看你自己的習慣，一般來說系統默認的參數即可。