macd頂底九轉指標公式

1. MACD頂底畫線指標公式為什麼出現行一缺少

DIF:EMA(CLOSE,12)-EMA(CLOSE,26)LINETHICK2;
DEA:EMA(DIF,9)LINETHICK2;
MACD:(DIF-DEA)*2,COLORSTICK;
STICKLINE(MACD>0,0,MACD,1,0),COLORRED;
STICKLINE(MACD<0,0,MACD,1,0),COLORGREEN;
STICKLINE(MACD>0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORYELLOW;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORWHITE;
ABC:=DRAWLINE(DIF>=HHV(DIF,13),DIF,C<=LLV(C,13),DIF,0);
P13:=(ABC-DIF);
STICKLINE(P13=0,DEA,DIF,1,1),COLORLIMAGENTA;
STICKLINE(P13=0,0.2,0.25,1,1),COLORGREEN;

公式通達信可用回。答

2. 求通達信中把MACD頂底背離信號疊加到分時主圖上的公式源碼

頂背離,你要確定一下是,dif的背離,還是,dea線的背離,還是macd柱子高低的背離.
提示方式是畫線提示還是文字提示還是圖標提示
例如下圖中的是劃線提示的

3. 通達信MACD公式，請高手請把下面指標公式里的金叉死叉+個箭頭表示謝謝

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;
DRAWICON(二次金叉,DEA*0.9,1) ;
DRAWTEXT(二次金叉,0.1,' 二次金叉'),COLORYELLOW;
DRAWICON(CROSS(DIFF,DEA),DEA*1.02,1);
DRAWICON(CROSS(DEA,DIFF),DIFF*0.98,2);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA) AND DIFF<0;
STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORRED,LINETHICK4;
DRAWTEXT(底背離,DIFF,' 底背離'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
頂背:DRAWLINE(A2=0,DEA,頂背離,DEA,0),COLORGREEN,LINETHICK4;

4. 求通達信MACD連續1次或以上《頂底背離》後，金叉或死叉出買賣信號指標及選股公式

你要的公抄式沒辦法分辨！要自己分辨
MACD底背離
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
QZQ:=BARSLAST(REF(MACD,1)<0 AND MACD>0);
QM:=LLVBARS(MACD,QZQ+20);
MQDZ:=IF(QM>QZQ,REF(MACD,QM),0);
XG1:=MACD<0 AND MACD>MQDZ
AND CLOSE=LLV(CLOSE,QZQ+20) AND MQDZ<0;
XG:REF(XG1,1)=1 AND MACD>REF(MACD,1);
或者 {XG:REF(XG1,1)=1 AND MACD>REF(MACD,1)AND DIFF>REF(DIFF,10);}

5. 通信達MACD頂底背離選股公式

學這些沒用的

6. 求助高手MACD指標頂（底）背離量化公式

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
Zero : 0;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORFF00FF;
DRAWTEXT(底背離,-0.2,' 底背離'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
頂背:DRAWLINE(A2=0,DEA,頂背離,DEA,0),colorgreen;
DRAWTEXT(頂背離,DEA*1.15,'頂背離'),colorwhite;
DRAWICON(CROSS(DIFF,DEA),DEA,'BUY');
DRAWICON(CROSS(DEA,DIFF),DEA,'SELL');

7. 求大智慧MACD底背離和頂背離公式

[MACD頂底抄背離] 參數 short=12 long=26 m=9 n=55
DIFF:EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA:EMA(DIFF,M);
MACD:2*(DIFF-DEA), COLORSTICK;
底背離:LLV(L,N)=L AND NOT(LLV(MACD,N)=MACD),COLORFF00FF;
頂背離:HHV(H,N)=H AND NOT(HHV(MACD,N)=MACD),COLORFFFFFF;

8. 求高手編寫大盤指數MACD周線頂底背離公式

頂背離或者底背離屬於形態分析范疇，你要有具體的判斷條件才能編寫，你也沒說版具體怎麼判權斷讓別人怎麼給你編寫啊。

例如下面的macd背離畫圖主圖與副圖，要有具體判斷條件才能編寫。例如下圖指標通過選擇參數能對比dif值背離，dea值背離，macd柱背離，macd背馳。至於你想用在什麼周期都可以，分鍾，小時，日線，周線，月線等等都可以。